Open Access Publishing Fund

Permanent URI for this collection

https://hdl.handle.net/1805/6519

The IUPUI Open Access Fund underwrites reasonable publication charges for articles published in fee-based, peer-reviewed journals that are openly accessible. This fund addresses changes in scholarly communications while increasing the impact of and access to scholarship created by IUPUI faculty. Learn more at: http://ulib.iupui.edu/digitalscholarship/openaccess/oafund

Annual reports on the progress of the fund are available from: https://scholarworks.iupui.edu/handle/1805/11935

Browse

Now showing 1 - 10 of 264

Mandates and the Contributions of Open Genomic Data
(2013-10-14) Xia, Jingfeng
This research attempts to seek changing patterns of raw data availability and their correlations with implementations of open mandate policies. With a list of 13,785 journal articles whose authors archived datasets in a popular biomedical data repository after these articles were published in journals, this research uses regression analysis to test the correlations between data contributions and mandate implementations. It finds that both funder-based and publisher-based mandates have a strong impact on scholars’ likelihood to contribute to open data repositories. Evidence also suggests that like policies have changed the habit of authors in selecting publishing venues: open access journals have been apparently preferred by those authors whose projects are sponsored by the federal government agencies, and these journals are also highly ranked in the biomedical fields. Various stakeholders, particularly institutional administrators and open access professionals, may find the findings of this research helpful for adjusting data management policies to increase the number of quality free datasets and enhance data usability. The data-sharing example in biomedical studies provides a good case to show the importance of policy-making in the reshaping of scholarly communication.
The effects of uncertainty under a cap-and-trade policy on afforestation in the United States
(2013-10-30) Dumortier, Jerome
To combat climate change, cap-and-trade policies have been proposed and implemented in countries around the world. The stochastic carbon price that results from a cap-and-trade policy makes investment decisions in carbon mitigating and sequestering practices more complex. This letter illustrates the consequence of uncertainty by analyzing forest carbon offset credits under a potential cap-and-trade policy in the United States. The effects of uncertainty on afforestation, carbon sequestration, cropland allocation, and commodity prices using a real option framework are assessed. When compared with deterministic models, less land gets converted from cropland to forestry over the projection period of 40 years because landowners ﬁnd it optimal to wait before changing land-use to gain more information about the carbon price evolution. The simulation shows that most afforestation occurs in the south and the northeast with almost no conversion in the Corn Belt. The lesson for policy makers is that under carbon price uncertainty, lower afforestation and carbon sequestration takes place. To foster afforestation, mechanisms are necessary to reduce uncertainty at the expense of higher commodity prices.
Adolescent Health-Risk Behavior and Community Disorder
(2013-11) Wiehe, Sarah E.; Kwan, Mei-Po; Wilson, Jeffrey S.; Fortenberry, J. Dennis
Background Various forms of community disorder are associated with health outcomes but little is known about how dynamic context where an adolescent spends time relates to her health-related behaviors. Objective Assess whether exposure to contexts associated with crime (as a marker of community disorder) correlates with self-reported health-related behaviors among adolescent girls. Methods Girls (N = 52), aged 14–17, were recruited from a single geographic urban area and monitored for 1 week using a GPS-enabled cell phone. Adolescents completed an audio computer-assisted self-administered interview survey on substance use (cigarette, alcohol, or marijuana use) and sexual intercourse in the last 30 days. In addition to recorded home and school address, phones transmitted location data every 5 minutes (path points). Using ArcGIS, we defined community disorder as aggregated point-level Unified Crime Report data within a 200-meter Euclidian buffer from home, school and each path point. Using Stata, we analyzed how exposures to areas of higher crime prevalence differed among girls who reported each behavior or not. Results Participants lived and spent time in areas with variable crime prevalence within 200 meters of their home, school and path points. Significant differences in exposure occurred based on home location among girls who reported any substance use or not (p 0.04) and sexual intercourse or not (p 0.01). Differences in exposure by school and path points were only significant among girls reporting any substance use or not (p 0.03 and 0.02, respectively). Exposure also varied by school/non-school day as well as time of day. Conclusions Adolescent travel patterns are not random. Furthermore, the crime context where an adolescent spends time relates to her health-related behavior. These data may guide policy relating to crime control and inform time- and space-specific interventions to improve adolescent health.
First principles study on the electrochemical, thermal and mechanical properties of LiCoO2 for thin film rechargeable battery
(2014) Wu, Linmin; Hoh Lee, Weng; Zhang, Jing
Thin film rechargeable battery has become a research hotspot because of its small size and high energy density. Lithium cobalt oxide as a typical cathode material in classical lithium ion batteries is also widely used in thin film rechargeable batteries. In this work, the electrochemical, mechanical and thermal properties of LiCoO2 were systematically investigated using the first principles method. Elastic constants under hydrostatic pressures between 0 to 40 GPa were computed. Specific heat and Debye temperature at low temperature were discussed. Thermal conductivity was obtained using the imposed-flux method. The results show good agreements with experimental data and computational results in literature.
The 1st International Joint Mini-Symposium on Advanced Coatings between Indiana University-Purdue University Indianapolis and Changwon National University: Preface
(2014) Zhang, Jing; Jung, Yeon-Gil
The 1st international joint mini-symposium on advanced coatings between Indiana University-Purdue University Indianapolis (IUPUI) and Changwon National University (CNU) was held on March 18-20, 2014 in Indianapolis, Indiana, USA. Research papers presented in the symposium are included in this proceeding. The symposium covered recent development in advanced coatings and related functional materials. The symposium offered the students and researchers from both universities a valuable opportunity to share a wide spectrum of new knowledge of advanced coatings and related functional materials. The research topics presented in the symposium included thermal barrier coatings, bio-related coatings, nano-materials and materials for energy conversion. The symposium enabled face-to-face discussions and developed genuine friendship, which promoted international collaboration and exchange program for researcher as well as students to carry out science work together. J.Z. would like to thank the support provided by the US Department of Energy (Grant No. DE-FE0008868, program manager Richard Dunst) and International Development Fund by the IUPUI Office of Vice Chancellor for Research. Y.G.J. acknowledges the support provided by the National Research Foundation of Korea (NRF) grant funded by the Korean Government (MSIP) (No. 2011-0030058) and the Human Resources Development Program (No. 20134030200220) of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korean Government Ministry of Trade, Industry and Energy.
First principles study of thermodynamic properties of lanthanum zirconate
(2014) Guo, Xingye; Zhang, Jing
Lanthanum zirconia (La2Zr2O7) has become an advanced thermal barrier coating material due to its low thermal conductivity and high temperature stability. In this work, the first principles calculations were used to study the thermodynamic properties of the material. Lattice parameters, bulk and shear modulus, and specific heat of La2Zr2O7 were calculated by means of density functional theory (DFT). Hydrostatic pressure-dependent elasticity constants and bulk modulus were also studied. The thermal conductivity was calculated based on the Fourier's law. The calculated properties are in excellent agreement with the experimental and calculation results in literature.
Numerical simulation of aluminum extrusion using coated die
(2014) Bakhtiani, Tushar; El-Mounayri, Hazim; Zhang, Jing
In aluminium extrusion, the life of the die tooling components is mainly limited by wear and fatigue. Therefore reliable predictions of the amount of wear and its distribution in dies are important factors for the die design. In this study the stress location and wear depth of the tooling components were calculated using finite element models incorporating the Archards wear model. A comparative study was conducted on an extrusion die without coating and with a bilayer (TiCN + Al2O3) chemical vapor deposition (CVD) coating. Stress distribution and the amount of wear were calculated. The results generated from the simulation would help predict the service life of the components through optimizing coating thickness.
Microstructure evolution and thermal durability with coating thickness in APS thermal barrier coatings
(2014) Lu, Z; Myoung, S W; Kim, E H; Lee, J H; Jung, Y G
The effects of the coating thickness on the delamination or fracture behavior of thermal barrier coatings (TBCs) were investigated through the cyclic furnace thermal fatigue (CFTF) and thermal shock (TS) tests. The TBCs were prepared using a NiCrAlY bond coat and an yttria-stabilized zirconia top coat, which were formed using the air plasma spray (APS) process. The thicknesses of the top coat were 200 and 400 μm, and those of the bond coat were 100 and 200 μm. TBC samples with a thickness ratio of 2:1 in the top and bond coats were employed in the CFTF and TS tests. After CFTF for 1429 cycles, the interface microstructure of the relatively thick TBC was in a sound condition without any cracking or delamination; however, the relatively thin TBC was delaminated near the interface between the top and bond coats after 721 cycles. In the TS, the TBCs were fully delaminated (> 50%) after 140 and 194 cycles for thicknesses of 200 and 400 μm in the top coat, respectively. These observations allow us to control the thickness of TBC prepared using the APS process, and the thicker TBC is more efficient in improving thermal durability in the cyclic thermal exposure and thermal shock environments.
Effect of microarc oxidation time on electrochemical behaviors of coated bio-compatible magnesium alloy
(2014) Liu, Jiayang; Zhang, Wiejie; Zhang, Hanying; Hu, Xinyao; Zhang, Jing
Magnesium alloys are newly promising biomaterials with potential application of human bone replacement. However, there is a drawback due to their high corrosion rates. In this study, AZ31 magnesium alloys were coated using microarc oxidation (MAO) process. Two oxidation durations, 1 minute and 5 minutes, were used. The samples were immersed in the simulated body fluid (SBF) for up to seven days. Then the electrochemical behaviors of the two samples were comparatively investigated. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) experiments were used. The results show that the 5-minute MAO coated sample had a better corrosion resistance than the 1-minute MAO coated sample. The study shows processing parameters, e.g., oxidation time, can be used to design an optimized MAO-coated magnesium alloy with controlled corrosion rates.
Lamellar to Rod Eutectic Transition in the Hypereutectic Nickel- Aluminum Alloy
(2014) Que, Z P; Gu, J H; Shin, J H; Choi, H K; Jung, Y G; Lee, J H
Directional solidification experiments were carried out on the hypereutectic Ni-25 at.% Al alloy to examine the effect of growth velocity on the eutectic microstructure. The growth velocity was varied from 1 to 20 μm/s at a constant temperature gradient of 10.0 K/mm. The microstructural observations of unidirectionally solidified samples show that the lamellar eutectic growth was observed in the sample solidified at a constant velocity of 1 μm/s and the rod eutectic growth at velocities higher than 10 μm/s. A microstructural transition from lamellar to rod eutectics was achieved at the intermediate velocity. The lamellar to rod eutectic transition was shown to result from the compositional change due to the presence of strong convection in the melt. The undercooling-spacing curves showed that the average eutectic spacings for the lamellar and the rod structures were 1.6 times larger than that in the minimum undercooling for a given velocity.

Browse

Browsing Open Access Publishing Fund by Issue Date

Results Per Page

Sort Options