Department of Engineering Technology

Department of Engineering Technology

Recent Submissions

  • Catranis, Daniel (2018-04-25)
    The cost of setting up and maintaining a high performance computing cluster for large scale CFD usage is too expensive for many smaller motorsport organizations, and so the turn to cloud based computing resources is an ...
  • Patterson, Eugene; Scherlag, Benjamin J.; Berbari, Edward J.; Lazzara, Ralph (Wiley, 2017)
    Introduction The electrophysiologic basis for characteristic rate-dependent, constant-late-coupled (390 + 54 milliseconds) premature ventricular beats (PVBs) present 4–5 days following coronary artery occlusion were ...
  • Kim, Jonghoon; Baird, Andrew; Koo, Dan D.; Ariaratnam, Samuel T.; Chong, Wai K. O. (Elsevier, 2016)
    To provide additional wastewater capacity and redundancy in South Chandler, Arizona, a new 28” High Density Polyethylene (HDPE) force main was installed from the upsized Kyrene Lift Station three miles east to tie into an ...
  • Koo, Dan D.; Lee, John J.; Sebastiani, Aleksei; Kim, Jonghoon (Elsevier, 2016)
    Statistics show that a bathroom is one of the most hazardous places especially for older people. Older people typically have greater difficulties with mobility and balance, making them more vulnerable to fall and slip ...
  • Matthews, John C.; Piratla, Kalyan; Koo, Dan D. (Elsevier, 2016)
    The consequences associated with pipe failures can be widespread impacting service, while potentially causing damage, affecting traffic, and contaminating water. Recently the visibility of pipe failures has increased with ...
  • Micol, Kevin (2017-08-07)
    This report details how to design and build an electric vehicle charger. The report will follow the SAE J1772 standard and cover the design of the charging and control circuits, the design of the software, building the ...
  • McNeely, Andrew (2017-08-05)
    The goal of this project is to design and construct a hydroponic control system. The control system will process signals from the required inputs and control output devices based on operational criteria. The control ...
  • Swaby, Kyle (2017-08-07)
    This report will go over the project that was completed as the ECET graduation project. This project involves designing a system that will gather data from various devices in a substation. This data was manipulated and ...
  • Chen, Rou; Yu, Huidan (Whitney); Zhu, Likun; Patil, Raveena M. (Wiley, 2017-04)
    We numerically study coalescence of air microbubbles in water, with density ratio 833 and viscosity ratio 50.5, using lattice Boltzmann method. The focus is on the effects of size inequality of parent bubbles on the ...
  • Larriba-Andaluz, Carlos; Girshick, Steven L. (Springer, 2017-01)
    It has been hypothesized that high-energy impact of very small silicon nanoparticles on a substrate may lead to epitaxial growth of silicon films at low substrate temperature. A possible means for producing such energetic ...
  • Bonitsky, Craig M.; McGann, Megan E.; Selep, Michael J.; Ovaert, Timothy C.; Trippel, Stephen B.; Wagner, Diane R. (Wiley, 2017-03)
    High energy trauma to cartilage causes surface fissures and microstructural damage, but the degree to which this damage renders the tissue more susceptible to wear and contributes to the progression of post-traumatic ...
  • Jiang, Feng; King, Brian (Springer, 2017-12)
    To evaluate the visual quality in visual secret sharing schemes, most of the existing metrics fail to generate fair and uniform quality scores for tested reconstructed images. We propose a new approach to measure the visual ...
  • Eggleton, Zach (2017-04-26)
    It's a thing
  • Libby, Rachael R. (2017-05-02)
    This is the senior design portfollio for Rachael R. Libby, CPET student at IUPUI. The project is to create a lab or two for the ECET434 class that will emphasize the students learning of the Android and Netduino environments ...
  • Goodman, David (2017-04-27)
    This document represents the summary of the important phases and elements of the communication between components that comprise the semi-automated shower system. The complete system utilizes six major components that work ...
  • Smith, Benjamin H (2017-03-02)
    This report is a summary of the Laminator Refurbishment Project senior design project as required by the Computer Engineering Technology curriculum. This project consisted of designing and implementing a control board PCB ...
  • Hasani, Eltjon; Eggleton, Zach (2017-04-28)
    This report will be about how we were able to repair a non-functioning coordinate measuring machine that hasn’t been working for four years. In the report, it will talk about the design overview of the PC that DivSys decided ...
  • Maizama Gaya, Ayouba (2017-04-28)
    This report is a summary of my senior design project. The project is called Ambient Temperature Control. This paper includes the parts and design of the project, how it is made and designed. It will also document all ...
  • Stover, Tyler (2017-04-14)
    As part of the development of the RLAPS Simulation Software Program (SSP) a vehicle physics model was developed around four subsystems – chassis and suspension, aerodynamics, powertrain, and tires. Tires are the most complex ...
  • Wang, Yan; Chen, Yingying (Jennifer); Yang, Jie; Gruteser, Marco; Martin, Richard P.; Liu, Hongbo; Liu, Luyang; Karatas, Cagdas (IEEE, 2016-08)
    This paper utilizes smartphone sensing of vehicle dynamics to determine driver phone use, which can facilitate many traffic safety applications. Our system uses embedded sensors in smartphones, i.e., accelerometers and ...

View more